Categories
Sports pullover with hood
Knitting, Knitting ideas, Sweaters, pullovers, jumpers

Sports pullover with hood

knitted pullover

Pullover with raglans and a hood, with a braid stripe in the center, a textured yoke and a kangaroo pocket on the shelf.

Size: S (M, L, size M shown).

Pullover sizes:
Chest circumference: 35.5 (39.5,
43.5, 47.5, 51.5)”/ 90 (100.5, 110.5, 120.5, 130.5) cm Length: 23.25 (24, 24.5, 24.5, 25)”/ 59
(61, 62, 62, 63.5) cm
Sleeve width at top: 13.5 (14.5, 15.25, 16.5, 17.5)” / 34.5 (37, 38.5, 42, 44.5) cm

pattern

Materials:
15 (16, 18, 20, 22) skeins of 50 g each of Koigu Wool Designs Kersti yarn (wool) in denim blue color No. 2171 (denim blue)
Circular needles 4 mm, length 80 cm 2 double needles 4 mm for I-cord
Stitch markers (M) Stitch holders (DP) Auxiliary needle (BC) Auxiliary yarn in contrasting color

Knitting density:
21 p. and 28 r. = 4″/10 cm, faces. satin stitch, knitting needles 4 mm.
32 p. = 4.75″/ 12 cm, pattern according to the chart, 4 mm knitting needles.
25 p. and 32 r. = 4″/ 10 cm, spine pattern, 4 mm knitting needles.

Loop Dictionary:
Crossing to the right (skew right): knit the 2nd stitch on the left knitting needle, passing the 1st loop in front, do not lower it from the knitting needle, knit the 1st stitch and lower both loops from the left knitting needle

Crossing to the left (skew left): knit the 2nd stitch on the left knitting needle, passing behind the 1st stitch, do not lower it from the knitting needle, knit the lth stitch and lower both loops from the left knitting needle
Cross. to the left by 4 stitches with holes: remove 2 stitches on the BC before work, knit 2, yarn over, knit 2 stitches together. cross. from the sun.

LACERY EDGE PATTERN (even number of p.)
Row 1 (LR): purl. P.
Row 2 (IR): knit. P.
Row 3: K1, *yo, 2 stitches together; rep. from * to last p., 1 persons.
Row 4: knit. P.
Row 5: purl. P.
Rows 1-5 make up the lace edge pattern.

Spine pattern (multiples of 4 p.)
Row 1 (LR): *sk. right, skr. left; rep. from * to the end. 
Row 2 (IR): purl. n. Repeat rows 1 and 2 for the pattern.

NOTE:
Circular knitting needles are used due to the large number of stitches, do not close in the round, with the exception of the hood strap.

knitted pullover

BACK.
Cast on 100 (112, 120, 132, 144) p.
Row 1 (LR): k1, *k2, p2; rep. from * to last 3 p., 3 knits.
Row 2 (IR): P3, *k2. , 2 p.; rep. from * to last p., 1 p.
Repeat last 2 rows for rib
K2/P2 2″ / 5 cm, finishing in IR.
Work rows 1-5 of the lace edge pattern. 

Track. row (preparatory) (IR):
34 (40, 44, 50, 56) purl. , place marker (RM), 32 p. , PM, out. p. to the end.

Start a diagram.

knitting pattern

Row 1 (LR): knit. p. to the marker, knit with a pattern according to the pattern for 32 p., knit. p. to the end. Continue knitting according to the pattern in this way, knitting loops on each side of the faces. stitch, to end of row 16, then repeat rows 5-16 until piece measures 15.75 (15.75, 15.75, 15, 14.75)”/ 40 (40, 40, 38, 37.5) cm from start, ending in IR.

Raglan formation. 
Note: when formation
falls on the pattern, knit incomplete rapports of faces. satin stitch 
Track. row (LR): cast off 2 (3, 3, 6, 9) sts, k3 (0, 0, 3, 2) - on the right needle 4 (1, 1, 4, 3) sts, [sk . right, skr. left] 7 (9, 10, 10, 11) times for the spine pattern, knit the pattern according to the pattern, as distributed, for 32 sts, [sk. right, skr. left] 7 (9, 10, 10, 11) times for the spine pattern, faces. p. to the end. 
Track. row (IR): cast off 2 (3, 3, 6, 9) sts, purl. p. to the spine pattern, knit 28 (36, 40, 40, 44) p. with the spine pattern, knit the pattern according to the pattern, as distributed, for 32 p., knit 28 (36, 40, 40, 44) p. with the spine pattern , out. p. to the end.

Row with decrease. raglan 1 (LR): k2, k2 together, knit with patterns, as distributed, to last. 3 p., 3 knits.
Row with decrease. raglan 2 (IR): 2 p., 2 p. together, knit with patterns, as distributed, to the end. Repeat decreasing rows 1 and 2 28 (31, 33, 36, 39) times - 38 (42, 46, 46, 46) sts.
Close the loops.

SHELF.
Knit as for the back until the end of the openwork edge pattern. Pass a auxiliary thread in a contrasting color through the middle 88 stitches of row 5 of the lace edge pattern to make it easier to lift the pocket burlap loops.
Work a prep row and start the pattern as for the back and knit until the piece is 6″/15cm from the start, ending in the IR.

Track. row (pocket division) (LR): k6 (12, 16, 22, 28). sts and place on the DP, knit the middle 88 sts for the pocket, turn, setting aside the remaining 6 (12, 16, 22, 28) sts on the DP. Knit only on 88 stitches of the pocket next. way: When knitting with a pattern, decrease 1 p. at the beginning of each of the next. 34 r.-54 p. Knit straight 1 IR. Place 54 pocket stitches on the DP.

Burlap pocket. 
From inside On the sides of the work, pick up 88 sts along the row with auxiliary yarn in a contrasting color. Knit faces. stitch until the burlap reaches the same number of rows as the cast stitches on each side, ending in IR. Track. row (connection) (LR): 6 (12, 16, 22, 28) persons. p. with DP, 88 persons. burlap pocket, 6 (12, 16, 22, 28) sts with DP -100 (112, 120, 132, 144) sts. Knit straight. stitch until the burlap reaches the same number of rows as the pocket. Track. row (connection) (LR): 23 (29, 33, 39, 45) knit., [knit the front trace. pocket item along with the trail. burlap] 54
times, persons p. to the end.

Continue with patterns until the piece reaches the same height as the back in front of the armhole, ending at the IR. Mark the middle 4 stitches in the last row.
Forming a raglan and dividing the middle of the neck. 

Note: Please read before proceeding.

Track. row (LR): cast off 2 (3, 3, 6, 9) sts, knit 3 (0, 0, 3, 2) - on the right needle 4 (1, 1, 4, 3) sts, knit in spine pattern for 28 (36, 40, 40, 44) p., knit with a pattern according to the pattern as distributed, for 14 p., attach the 2nd skein of yarn and close the middle 4 p. knit with a pattern according to the pattern as distributed for 14 p. , knit in a spine pattern for 28 (36, 40, 40, 44) sts, knit. p. to the end.

Knitting both sides of the neckline at the same time, but from different skeins, continue the trace. way: 

Track. row (IR): cast off 2 (3, 3, 6, 9) sts, purl. p. to the spine pattern, knit with a spine pattern for 28 (36, 40, 40, 44) 11., knit with a pattern according to the pattern to the end of the first side, knit with a pattern according to the pattern on the second side to the marker, knit with a pattern for 28 (36, 40 , 40, 44) p., purl. p. to the end.

Row with decrease. raglan 1 (LR): k2, k2 together, knit in patterns as distributed until the end of the first side, knit the 2nd side in a pattern until the last. 3 p., persons.

Row with decrease. raglan 2 (IR): 2 p., 2 sts together, knit with patterns, as distributed, until the end of the first side, knit the 2nd side with patterns.
Repeat rows with decrease. raglan 1 and 2 another 17 (20, 22, 25, 28) times, then form the neckline next. in this way: Close 3 (5, 5, 5, 5) sts from each edge of the neck 1 time, 3 (3, 4, 4, 4) sts 2 times, 2 sts 2 times, 1 st 4 times, AT THE SAME TIME , repeat rows with decrease. Raglan 1 and 2 9 more times - 2 stitches remain on each side after all formations are completed. Close the loops.

LEFT SLEEVE. Cast on 48 (52, 52, 56, 56) sts.
Row 1 (LR): k1, *k2, p2; rep. from * to last 3 p., 3 knits.
Row 2 (IR): P3, *k2, P2. ; rep. from * to last p., 1 p.
Repeat last 2 rows for rib k2/p2. 4″ / 10 cm, finishing in IR.

Work rows 1-5 of the lace edge pattern. Knit faces. stitch, adding 1 st on each side in every 6th (6th, 4th, 4th, 4th) row 11 (12, 7, 8, 18) times, then in every 0 (0 , 6th, 6th, 0) row 0 (0, 7, 7, 0) times – 70 (76, 80, 86, 92) 1p.

Work straight until piece measures 15.75 (15.75, 16.25, 16.25, 16.75)”/ 40 (40, 41, 41, 42.5) cm from start, ending in IR.

Raglan formation.
Track. row (LR): cast off 2 (3, 3, 6, 9) sts. 1 st left on the right needle, knit in a spine pattern until the last one. 3 (4, 4, 7, 10) p., knit. p. to the end. Track. row (IR): cast off 2 (3, 3, 6, 9) sts. 1 st remaining on the right needle, knit in a spine pattern until the last one. p., 1 p.

Row with decrease. raglan 1 (LR): 2 persons. , 2 stitches together, knit with patterns as
distributed to last 3 p., 3 knits. Row with decrease. raglan 2 (IR): 2 p., 2 p. together, knit with patterns, as distributed, to the end. Repeat rows with decrease. raglan 1 and 2 another 26 (29, 31, 28, 25) times – 12 (10, 10, 16, 22) sts.
Only for sizes 1X and 2X.
[Knit 2 rows straight, then repeat rows with decreasing rows. raglan 1 and 2] 3 (6) times-10 sts.

For all sizes, form the top of the rim. Track. row (decrease, LR): k2, k2 together, knit with patterns as distributed to the end.
Track. row (IR): cast off 4 (3, 3, 3, 3) sts, knit to the end.
Repeat last 2 rows 1 more time. Cast off the remaining 2 sts.

RIGHT SLEEVE.
Knit as for the left sleeve until the upper part of the okat is formed.
For all sizes, form the top of the rim. 
Track. row (decreased, LR): close + 3, 3) sts, knit to the end with a pattern. 
Track. row (IR): 2 p., 2 sts in knit to the end. 
Repeat last 2 rows 1 more time. Cast off the remaining 2 sts. 

knitted pullover

HOOD.
Cast on 36 sts. Knit 1 row with a spine pattern. Continuing with the spine pattern, cast on 4 sts at the beginning of each next. 6 (6, 7, 7, 7) IR, introducing the ones added to the pattern, PM for the back neck at the beginning of the last IR 60 (60, 64, 64, 64) sts.

Work straight in pattern until piece measures 10″/ 25.5 cm from start, ending in LR.

Start shaping the top of the hood.

Track. row (decreased, IR): 2 sts together, knit with pattern to the end - decreased 1 st. Repeat row with decreased. in every 2nd row 14 more times - 45 (45, 49, 49, 49) sts. PM at the end of the last IR for the upper edge of the hood.

Track. row (approx., LR): knit with a pattern to the last one. p., add 1 cross. p. from thread between 2 p., 1 persons. - added 1 p. Repeat row from approx. in every 2nd row 14 more times - 60 (60, 64, 64, 64) sts.

Work straight in the pattern until the distance from the top edge of the hood reaches the same height as the distance from the top edge of the hood to the back neck marker of the first half of the hood, ending in LR. Cast off 4 sts at the beginning of each next. 6 (6, 7, 7, 7) IR-36 p. Cast off the loops. Sew the hood seam from the hood top edge marker to the back neckline marker.

FINISHING THE JOB.
Lightly steam the pieces to the size of the pattern. Sew raglan seams. Sew side seams and sleeve seams. Sew the hood to the edge of the neck, centering the hood seam in the middle of the back neck.

Shelf and hood trim.
From the front side of the work, starting from the top edge of the hood, raise 77 sts along the right front edge of the hood to the front neckline, RM, 35 sts along the right edge of the front neckline, RM, 5 sts along the edge of the closure of the front neck loops, RM, 35 sts along the left edge of the front neckline, PM, 77 sts along the left edge of the hood – 229 sts. Close in the round and PM to start
circle. row. Circle. row 1: knit. p., knitting 3 p. together in the middle. on average 3 p.

Repeat the circle. row 1 2 more times. 1 lap. a number of persons. P.

Circle. row 5: knit. p. to the 1st marker, yarn over, 2 p. together knit., knit. p. to middle p., add 1 cross. p. from the thread between 2 p., knit 1, add 1 cross. p. from thread between 2 p., knits. p. up to 2 p. before next. marker (neck edge), knit 2 stitches together. , yarn over, persons. p. to the end.

Circle. row 6: knit. p. to middle p., add 1 cross. p. from thread between 2 p., 1 persons. , add 1 cross, stitch from thread between 2 stitches, knit. p. to the end.
Repeat the circle. row b 1 more time.
Circle. row 8: knit. P.

Close the loops.
Fold the bar to the wrong side. side and sew along the row of stitches.

Work I-cord purl. loops approximately 60″ / 152.5 cm long. way:
Using 2 double needles, cast on 3 sts. *P1 row. n. Without turning the work, return the loops again to the opposite end of the knitting needle to complete the next step. row from the front side. Pull the thread tighter from the end of the row. Rep. from * to the required cord length. Close the loops. Thread the cord through the holes on the hood panel.

Related posts

Leave a Reply

Required fields are marked *

en_USEnglish