Categories
Jumper Jewels Tide
Crochet, Knitting ideas, Sweaters, pullovers, jumpers

Jumper Jewels Tide

knitted pullover

Jewels Tide jumper from DROPS Design.

Dimensions:S – M – L – XL – XXL – XXXL

You will need: yarn DROPS MUSKAT from Garnstudio 500-550-550 -600-650-700 g color 83, pearl; 100-150-150-150-150-150 g color 76, light denim; hook size 4 mm.

Crochet Density: 17 double crochets wide and 10 rows high = 10 x 10 cm.

Hook size is only a guide. If there are too many loops at 10 cm, change the hook to a larger size. If you get too few loops per 10 cm, change the hook to a smaller size.

At the beginning of each row of double crochets, work 3 chain stitches that replace the first double crochet. The circle ends with 1 double crochet in the 3rd or 2nd chain loop of the previous row (depending on whether the row began with 2 or 3 chain loops).

At the beginning of each row of double crochets, 2 chain loops are knitted, which replace the first double crochet. The row ends with 1 double crochet in the 3rd or 2nd chain stitch of the previous row.

knitted pullover

Decrease tip (for sleeves):

Decrease in a row of double crochets inside the 2 outer stitches on each side. Decrease 1 stitch by knitting 2 double crochets together as follows:

* Yarn over 1, insert hook into next loop, pick up yarn and pull through loop, yarn over 1 and pull through first 2 loops. hook*, knit from *-* 1 more time, make 1 yarn over and pull it through all 3 loops on the hook (1 loop decreased).

Stripes

Crochet the stripes as follows: knit 6 rows with colored pearls and the first row on the wrong side, * 1 row knit with light denim color and 5 rows with colored pearls*, repeat from *-* (light denim row is always knitted from the right side). To prevent the pearl thread from getting in the way when working with light denim, lay the pearl thread on top of the stitches being worked, then hide it and draw it along the row.

The front, back and sleeves are knitted separately forward and backward from top to bottom. First, work the right shoulder on the front piece with the neck increase, work the left shoulder on the front piece with the neck increase, then join both pieces together to work the front piece back and forth. Treat the back in the same way. The sleeves are knitted from top to bottom. The part is stitched and the neck is finished.

Right front shoulder:

Work 22-22-22-28-28-34 chain stitches using a size 4mm crochet hook in the DROPS Muskat pearl pattern. Operation of STRIPES - read the description above. Knit the first row on the right side as follows: in the 4th chain stitch. From the hook, knit 1 treble s2n (2 treble s2n), into each of the remaining chain stitches. knit 1 dc. = 20-20-20-26-26. -32 double crochets. Turn and work 1 treble crochet into each double crochet.

Work on the right side as follows: A.1A, A.1B next 12-12-12-18-18-24 sts, A.1C. Continue this pattern back and forth until A.1 is completed (2 stitches added at mid front = 22-22-22-28-28-34 stitches).

REMEMBER ABOUT TENSIONING THE THREAD WITH A HOOK! Set the piece to one side and work on the left shoulder.

Left front shoulder:

Work 22-22-22-28-28-34 chain stitches using crochet size 4mm in pearl color. Remember STRIPES - read the description above. Knit the first row on the right side as follows: in the 4th chain stitch. from the hook, knit 1 treble with 2n (2 treble with 2n), in each of the remaining chain stitches. knit 1 dc. = 20-20-20-26-26. -32 double crochets. Turn and work 1 treble crochet into each double crochet.

On the right side, knit as follows: for the next 6-6-6-12-12-18 stitches, work A.1D, A.1B, A.1E. Continue this pattern back and forth until A.1 is completed (2 stitches added at mid front = 22-22-22-28-28-34 stitches).

At the end of the last row, work 25-31-31-25-31-31 in a slightly loose chain stitch for the neck. Fasten the chain row with 1 intermediate loop into the outer loop at the neckline on the right shoulder (from the wrong side). Cut and fasten the thread.

knitted pullover

Front end:

Start on the right side on the right shoulder, continue chain stitches, then work the left shoulder as follows: work the next 60-66-66-72-78-90 stitches according to pattern A.2A, A.2B, A. 2C.

Note: When working with chain stitches, work 1 dc in each chain stitch = 69-75-75-81-87-99 stitches. Continue this pattern back and forth. A.2 is repeated in height. AT THE SAME TIME, at a piece height of 19-19-19-20-22-22 cm (adjust so that the next row is next to the double crochets), at the end of the row, knit 8 chain stitches for one armhole. Turn and work 1 double crochet into the 4th chain from the hook, work 1 double crochet into each of the other 4 chain stitches, work to the end of the row as before, and work 8 chain loops at the end of the row for the second armhole. Turn and work 1 double crochet into the 4th chain from the hook, work 1 double crochet into each of the other 4 chain stitches, work to the end of the row as before = 81-87-87-93-99- 111 loops. Continue the pattern, but now with two additional repetitions of A.2B.

Continue until the height measures 53-55-57-59-61-63 cm. Work 1 row of double crochets. Cut and secure the strand. The front part measures approx. 54-56-58-60-62-64 cm from shoulder.

Left rear shoulder:

Remember the STRIPES! Work 22-22-22-28-28-34 chain stitches using crochet size 4mm in pearl colour. Knit the first row on the right side as follows: in the 4th chain stitch. From the hook, knit 1 treble s2n (2 treble s2n), into each of the remaining chain stitches. knit 1 dc. = 20-20-20-26-26. -32 double crochets. Turn and work 1 treble crochet into each double crochet.

Set the piece to one side and work on the right shoulder.

Right rear shoulder:

Work 22-22-22-28-28-34 chain stitches using crochet size 4mm in pearl colour. Remember STRIPES! Knit the first row on the right side as follows: in the 4th chain stitch. From the hook, knit 1 treble s2n (2 treble s2n), into each of the remaining chain stitches. knit 1 dc. = 20-20-20-26-26. -32 double crochets. Turn over and work 1 treble crochet in each treble crochet.

At the end of this row, work 29-35-35-29-35-35 slightly loose chain stitches for the neck. Fasten the chain row with 1 intermediate loop into the outer loop at the neckline on the left shoulder (from the wrong side). Cut and fasten the thread. The back is now connected.

Rear end:

Start on the right side on the left shoulder of the back and continue as follows: on the right side continue working on chain stitches, then work the right shoulder of the back as follows: Work A.1A, A.1B for the next 60-66-66 rows. -72-78-90 loops, A.1E. Continue this pattern back and forth. When height A.1 is completed, work as follows: for the next 60-66-66-72-78-90 stitches work A.2A, A.2B, A.2C. A.2 is repeated in height. At the same time, when the height of the piece is 19-19-19-20-22-22 cm, knit 8 chain stitches at the end of the row for one armhole. Turn and work 1 double crochet into the 4th chain from the hook, work 1 double crochet into each of the other 4 chain stitches, work to the end of the row as before, and work 8 chain loops at the end of the row for the second armhole. Turn and work 1 double crochet into the 4th chain from the hook, work 1 double crochet into each of the other 4 chain stitches, work to the end of the row as before = 81-87-87-93-99- 111 loops. Continue the pattern, but now with two additional repetitions of A.2B.

Continue until the height measures 53-55-57-59-61-63 cm. Work 1 row of double crochets. Cut and secure the strand. Back size approx. 54-56-58-60-62-64 cm from shoulder.

Sleeves:

Knit 65-65-65-71-77-77 chain stitches with crochet size 4 mm, pearl color. Remember STRIPES! Knit the first row on the right side as follows: in the 4th air. From the hook, knit 1 treble stitch. from the hook (2 tbsp. s2n), into each of the remaining air. p. knit 1 tbsp. = 63-63-63-69-75. -75 double crochets.

Work the next row from the wrong side as follows: 4 chain stitches (= 1 double crochet + 1 chain crochet), skip 2 double crochets, * work 2 double crochets before the next double crochet (worked between double crochets), 1 air work 3 treble crochets* work from *-* until 3 treble crochets remain, work 2 treble crochets before the next treble crochet, 1 chain crochet, skip 2 treble crochets and finish 1 treble crochet in the last st. s2n = 63-63-63-69-75-75 loops.

Work the next row on the right side as follows: work the next 54-54-54-60-66-66 stitches according to pattern A.2A, A.2B, A.2C. Continue this pattern back and forth. A.2 is repeated in height.

At the same time, when the sleeve length is 6 cm, decrease 1 stitch on each side - read TIP FOR REDUCTIONS (2 stitches decreased). Decrease in this way every 6-6-6-5-4½-4½ cm, total 8-8-8-9-11-10 times on each side = 47-47-47-51-53-55 sts. When the sleeve reaches a height of 55-55-56-55-54-52 cm, cut and fasten the thread. Knit the other sleeve in the same way.

knitted pullover

Assembly:

Sew the shoulder seams. Sew the seams of the sleeves, leaving a 4 cm gap at the top. Sew the butt of the sleeve to the armhole. Sew the cut along the top of the sleeve to the bottom of the armhole - see sketch.

Sew the side seams edge to edge using the outer seam, leaving a 20cm gap at the bottom.

Neck:

Start with one shoulder, 4mm hook and pearl color: work 1 double crochet in first stitch, * 3 chains, 1 double crochet around next row/chain *, work from *-* around neck, end with 3 chains loops and 1 intermediate loop in the first double crochet at the beginning of the row. Cut and fasten the thread.

Related posts

Leave a Reply

Required fields are marked *

en_USEnglish