Categories
Pullover with braid pattern and shawl collar
Knitting, Knitting ideas, Sweaters, pullovers, jumpers

Pullover with braid pattern and shawl collar

knitted pullover

A plain pullover with diagonal structures and large vertical braids combines the best traditions and fashion trends. A wide shawl collar fitted into a V-shaped neck, on the one hand, will keep you warm and, on the other hand, will make it easier to put on. Stylish detail: side slits to waist level.

Dimensions: 38/40 (46/48) 52/54

pattern

 You will need:

yarn (48% alpaca wool, 36% polyacrylic, 9% polyamide, 7% polyester; 180 m/50 g) – 400 (500) 600 g orange;

knitting needles No. 5,5 and 6; circular knitting needles No. 5.5.

Pattern 1: elastic band (the number of loops is a multiple of 4 + 2 + 2 edge loops).

Purl rows: edge, alternately purl 2, knit 2, finish with purl 2, edge.

Front rows: knit loops according to the pattern.

Pattern 2:

front stitch = front rows - front loops, purl rows - purl loops.

knitted pullover

Pattern 3: braid pattern A (the number of loops is a multiple of 8) = knit according to pattern 1.

 It shows only the facial rows; In the purl rows, knit loops according to the pattern. Perform 2 (3) 4 x 8 stitches of rapport between the arrows, while in the 7th row. Cross the last 2 stitches of each repeat with the next 2 stitches, ending with loops after the left arrow.

Constantly repeat 1-8th r.

Pattern 4: pattern of “braids” B (18 p.) knit according to. diagram 2. It shows only the front rows; In the purl rows, knit loops according to the pattern. Constantly repeat 1-16th r.

Pattern 5: “braid” C (at 14 p.) = knit according to. diagram 3. It shows only the front rows; In the purl rows, knit loops according to the pattern. Constantly repeat 1-8th r.

Pattern 6: “braid” D (14 p.) = knit according diagram 4. It shows only the front rows; In the purl rows, knit loops according to the pattern. Constantly repeat 1-8th r.

Pattern 7: pattern of “braids” E (the number of loops is a multiple of 8) = knit according to pattern 5. It shows only front rows; In the purl rows, knit loops according to the pattern. Start with 8 stitches in front of the right arrow, then perform 2 (3) 4 8 stitches of rapport between the arrows, while in the 7th row. Cross the last 2 sts of each rapport with the next 2 sts. Constantly repeat the 1st-8th p.

knitting pattern

Knitting density: distribution of loops - 21 p. x 25 r. = 10 x 10 cm.

knitted pullover

Back: on knitting needles No. 5.5, cast on 124 (140) 156 p. and for the bottom bar, knit 12 cm with pattern 1, while starting with 1 purl row and in the last row of the bar, evenly decrease 6 p. = 118 (134) 150 p.

 Then, on size 6 needles, distribute the stitches as follows. way: edge, 24 (32) 40 sts of pattern 3, 18 sts of pattern 4, 14 sts of pattern 5, 4 sts of pattern 2, 14 sts of pattern 6, 18 sts of pattern 4, 24 (32) 40 sts pattern 7, edge.

For side bevels, add 9 rows on both sides. from the bottom bar 1 x 1 p., then in every 6th p. 4 x 1 p. and in every 4th p. 3 x 1 p. acc. pattern 134 (150) 166 p.

 After 37 cm = 92 r. (41 cm = 102 rub.) 44 cm = 110 rub. from the bottom bar, close on both sides for shoulder bevels 1 x 4 (5) 6 p. and in every 2nd p. close 4 x 4 p. and 6 x 5 p. (7 x 5 p. and 3 x 6 p.) 10 x 6 p.

After 42.5 cm = 106 r. (46.5 cm = 116 rub.) 49.5 cm = 124 rub. From the bottom bar, close the middle 28 stitches for the neckline and finish both sides separately.

To round the neck along the inner edge, close every 2nd r. 1 x 2 p. and 1 x 1 p.

knitted pullover

Before: knit like a back, but for a V-neck already after 22.5 cm = 56 r. (26.5 cm = 66 rub.) 29.5 cm = 74 rub. From the bottom bar, knit on middle 2 stitches as follows: knit the 2nd stitch before the 1st stitch, then knit the 1st stitch.

Next, divide the work in the middle and finish both sides separately.

To bevel the neck along the inner edge, close every 2nd r. 8 x 1 p. and in every 4th p. 9 x 1 p.

knitted pullover

Sleeves: on knitting needles No. 5.5, cast on 66 stitches for each sleeve and knit 11 cm for the placket with pattern 1, while starting with 1 purl row and in this row distribute the loops as follows: edge, * 1 purl, 2 knits, 1 purl , from “constantly repeat, edging.

 In the last row of the bar, evenly add 2 sts = 68 sts.

Then, on knitting needles No. 6, distribute the stitches as follows: edge stitch, 24 stitches of pattern 3, 18 stitches of pattern 4. 24 stitches of pattern 7, edge stitch.

For bevels, add 9 (7) 5 rows on both sides. from the bar 1 x 1 p., then in every 8th p. 4 x 1 p. and in every 6th r. 5 x 1 p. (in every 6th row 2 x 1 p. and in every 4th row 16 x 1 p.) in every 4th row. 20 x 1 p. and in every 2nd r. 4 x 1 p. acc. pattern = 88 (106) 118 p.

After 30.5 cm = 76 r. (34.5 cm = 86 rub.) 37.5 cm = 94 rub. close all loops from the bar.

knitted pullover

Assembly: sew shoulder seams.

For a shawl collar, using circular needles No. 5.5, cast on 152 stitches along the edge of the neckline, starting and ending in the middle of the front.

Knit the pattern in 1 rows in the forward and reverse directions, while in the 1st row. (= purl row) distribute the stitches as follows: edge, * purl 2, knit 2, from ” perform 14 times, purl 2, ** knit 2, purl 1, from ** perform 12 times = 38 middle loops, *** Knit 2, purl 2, from *** do 14 times, edge stitch.

 In the next row, knit loops according to the pattern.

 At 3 p.m. (= purl row) after each of the individual loops, make 1 yarn over and knit it in the next front row = 164 sts. Now there are 50 middle loops in the work. Knit loops according to the pattern.

 Then, for shortened rows, attach a marker before and after the middle 50 stitches.

 In the next pizza row, knit up to 50 middle loops inclusive, turn the work with 1 yarn over and knit these 50 stitches in the opposite direction, turn the work with 1 yarn over, “knit up to the yarn over and knit it together with the next loop in the pattern, knit 2 more p., turn the work with 1 yarn over and knit to another yarn over, knit this yarn over with the next loop together according to. pattern, knit 2 more stitches, turn the work with 1 yarn over, from ” repeat 1 more time, then continue working on all loops again.

After 11 cm from the beginning of knitting the collar, close all the loops according to the pattern.

 Place the right end of the collar over the left and sew to the bevels of the neck.

 Sew in the sleeves, pushing them down slightly.

 Sew the side seams and sleeve seams, leaving the bottom 12 cm open for cuts.

Related posts

Leave a Reply

Required fields are marked *

en_USEnglish